Crazy Bike Frame Made Out Of 147 Nuts

Bicycle frames are most typically designed out of steel. If you’ve obtained dollars for anything nicer though, you might go with a little something in aluminium or carbon fiber. [The Q] went totally off-the-wall with this construct, nevertheless, setting up a bicycle frame out of 147 nuts. 

Individuals forks really do not encourage self-assurance.

Of course, a selection of nuts in many sizes have been laid out and welded together to make the frame. The total layout is a typical diamond body, albeit made out of quite a few nuts trapped collectively rather than with tubes. Notably although, a number of significant regions aren’t created in this way. The entrance and rear dropouts are designed of sheet steel, and the base bracket, seat write-up mount, and headstem are all manufactured of metal tube. Following welding, the bicycle was given an attractive coat of grey paint. It was then laced up with the regular jogging gear and presented a set of chunky mountain bicycle tires.

We wouldn’t want to force this frame far too tricky above bumps and jumps. The video only shows the nuts getting joined with tack welds, and the entrance forks glimpse specifically fragile. Just one suspects a respectable shock loading could snap areas of the frame apart. Overall, however, it is an eye-catching bike that has plenty of straightforward locations to connect a lock. For an ultra-fashionable city-bound cruiser, it would be challenging to beat.

We’ve showcased some unusual and excellent bikes over the decades, such as this tasteful plywood structure. Video right after the split.

Luis Robinson

Next Post

Is This The Smallest CP/M Machine Ever?

Thu Nov 17 , 2022
If you experienced an office term processor in the late 1970s, the chances are it ran Digital Research’s CP/M functioning technique. IBM went for Microsoft in the 1980s and the at the time-dominant player fell on really hard times, but it survives now as a common alternative on retrocomputer platforms. […]

You May Like